6CH PLC Amplifier Board Module / SCR Output Board DIN Slider Servo System
The PLC output amplifier board converts the low-power control signal into a larger power output control signal to control the motor, contactor, solenoid valve, etc.
PLC output amplifier board product features:
1 . The advantages of simple wiring, easy installation, small footprint, long service life, etc., intermediate relay ideal replacement products;
2 . Microsecond turn-on and turn-off time, one thousandth of the relay, no contact switch, fast and frequent work without affecting the life;
3 .8-channel transistor output, 24V DC power supply, output current 6A per channel, supporting use with PLC;
4 . With photoelectric isolation parts, strong anti-interference ability, protection of PLC output contacts, increase PLC life;
5 . Suitable for driving large loads, with good compatibility with both resistive and inductive loads, such as solenoid valves, contactors, work lights, small motors, etc.;
6 . Service Commitment "24 months warranty, lifetime maintenance";
7 . Beautiful appearance, safe and reliable, easy installation of standard guide rails;
Optocoupler isolation is the use of optocoupler isolation. The structure of the optocoupler is equivalent to the encapsulation of the light emitting diode and the phototransistor. The opto-isolated circuit makes no direct electrical connection between the isolated two parts of the circuit, mainly to prevent interference caused by the electrical connection, especially between the low voltage control circuit and the external high voltage circuit.
advantage
1 duty cycle adjustable;
2 high isolation pressure;
3 strong anti-interference ability, the current with a static shielding optocoupler is easy to buy, strong and weak electricity between the isolation performance is very good, in addition, the optocoupler is a current-type device, the voltage noise can be effectively suppressed;
4 The transmission signal ranges from DC to several MHz, where the linear optocoupler is especially suitable for signal feedback.
♦ Features
-- Standard DIN rain mounted
-- Status indication for each input
-- Special circuit for self test, overload, short-circuit and anti-interference
-- High quality SCR components with low on-resistance and excellent stability
♦ Typical Applications
• Micro-controller • PLC control • Servo System
• Electro-magnetic valve • DC Motors
• Home intelligent control
♦ Technical data
| Model | JR-xK |
| Output type | SCR |
| I/O points | 4,6,8,12,16 |
| Input signal | NPN/PNP |
| Input voltage | DC24V |
| Output voltage | AC 24-250V |
| Output Contacts | 1NO |
| Contact capacity(resistive) | 3.15A 250VAC |
| Operation voltage/Release voltage | >5VDC/<1.5VDC |
| Operation time/Release time | <10ms/<10ms |
| Switching frequency | ≥5kHz |
| Dimensions(WxH) | 87×46mm |
| Mounting | DIN rail |
Product Tags:
|
|
6CH PLC Amplifier Board Module / SCR Output Board DIN Slider Servo System Images
|
